Video Transcript for Breaking Down the Phoenix Faucets RV Bathroom Vessel Sink Faucet

Hi, everybody, Andy here with etrailer.com. And today, we're gonna take a look at this Phoenix Faucets RV bathroom vessel sink faucet. This faucet is going to let you upgrade the bathroom vessel sink faucet in your RV or camper. And this is going to be a pretty simple installation. You're just going to drop this new faucet in place through the mounting hole of your existing faucet and then tighten the included mounting hardware. And it does come with this very handy tool and hopefully, as you can see right here, we have these posts and then this hardware here that's tightening the faucet down.

So this tool is going to make tightening those nuts very easy. So very simple, very easy installation. And then once you have the hardware tightened down with this handy tool, you're just going to connect the included hot and cold water lines and the use of tub and tile caulk may be required depending on your particular installation. That is not included with this faucet. So if you need it, that would be a separate purchase for you.

Now, this features a single-handle design with a lever-style handle and the ceramic disc cartridge is maintenance free and the durable long-lasting disc create a watertight seal when the faucet is turned off. This has a flow rate of 1.2 gallons per minute. This is WaterSense certified and this high rise spout is tall enough to clear your vessel sink edge Measuring from the base of the countertop or the sink that this will be installed to or mounted on to the aerator, we are sitting right at about 3 1/4 inches. Now, you can add a matching pop-up drain and lift rod assembly. That is of course sold separately, but you just remove this rubber plug here and that will allow you to add that pop-up drain and lift rod assembly.

So the functionality is available here if you desire to do that. Now, this is of a durable zinc alloy, zinc and zinc alloy construction rather. With this really nice brushed nickel finish, this is probably one of my favorite finishes is brushed nickel finish. So this'll go with just about any type of decor, but if this isn't something that you're really interested in, the good news is we do carry this into other finishes. We have this available in a stylish matte black finish and also a chrome finish.

And so you can find those options here at etrailer.com. Now, I took some measurements before our time together and just looking, first of all, at the overall height from the top of our faucet, all the way down to the base that this will be installed on, we're sitting at about 6 5/8 inches tall. And then the overall width of our base, we are sitting right at 6 3/8 inches wide, and it's 2 3/8 inches deep. And measuring the spout length, I measured from the center of our faucet, all the way to the end of our spout, and we we're almost five inches long, right at 4 7/8 inches long on that spout length. Our water supply line size is 0.5 inch male pipe thread and instructions are included to walk you through the very simple installation process. Overall, I was really impressed with the build quality of this faucet, the stylish look of the faucet. And of course, I really like that brushed nickel finish, but obviously I don't have this hooked up to water, but it was a very simple, very easy installation to my demonstration table here, so this is going to be able to be installed in no time and you'll be able to put it to use. Well, that's gonna conclude our look today. I do hope that it was helpful for you. Again, my name is Andy. Thank you for joining me.